Reset filter Export

___Part No.___ ______ (勾選方式)	___Function___ ______ (勾選方式)	___Features___	___VCC(V)___	___Package___ ______ (勾選方式)
___RCR6C___	___Remote Controller for Toy Car___	___Decoder for Remote Controller with Seven Functions___ ___(Forward/Backward/Turbo/Right-turn/Left Turn/Two)___ ______ ___* Operating voltage range: 2.4V~4.5V___ ___* RCR6C-A built-in 3.6V ZENER___ ___RCR6C-B built-in 4.2V ZENER___ ___RCR6C-C built-in 5.0V ZENER___ ___* Few external components needed___ ___* 7-function remote controller controlling Forward/ Backward/ Turbo/___ ___Right-turn/ Left turn/ two function keys___ ___* Complement to UTC RCT6.___	___2.4~ 4.5___	___DIP-18___ ___DIP-20___
___RCT6___	___Remote Controller for Toy Car___	___Remote Controller with Seven Functions___ ___(Forward/Backward/Turbo/Right-turn/Left Turn/Two)___ ______ ___* Operating voltage range: 2.0V ~ 5.0V___ ___* RCT6-A built-in 3.6V ZENER___ ___RCT6-B built-in 4.2V ZENER___ ___RCT6-C built-in 5.0V ZENER___ ___* Very low Stand-by current___ ___* Few external components needed___ ___* 7-function remote controller controlling Forward/Backward/Turbo/___ ___Right-turn/Left turn/two function keys___	___2.0 ~ 5.0___	___DIP-16___
___RCT2E___	___Remote Controller for Toy Car___	___Encoder for Remote Controller with Five Functions___ ___(Forward/Backward/Turbo/Right/Left)___ ______ ___* Wide and Low operating voltage range: 1.8V ~ 5.0V___ ___* 5-function remote controller controlling forward/ backward/ turbo/___ ___right/ left.___ ___* Provide two transmissive interface (RF and IR) for different___ ___application.___ ___* Auto Power-OFF function___ ___* Few external components needed and Oscillator with an external___ ___resistor.___ ___* Low Standby current and low operating current.___ ___* Long distance Remote Control to 100M in UTC RCT2E and UTC___ ___RCR2C pairing.___ ___* Typical oscillator frequency:___ ___RF: 116 ~ 140KHz.___ ___IR: 114KHz (Carrier Frequency: 57KHz).___ ___IR: 76KHz (Carrier Frequency: 38KHz).___	___1.8 ~ 5.0___	___DIP-14___ ___SOP-8___
___RCR2C___	___Remote Controller for Toy Car___	___Decoder for Remote Controller with Five Functions___ ___(Forward/Backward/Turbo/Right/Left)___ ______ ___* Wide and Low operating voltage range:___ ___1.8V ~ 5.0V(No DC-DC)___ ___1.0V ~ 5.0V(Use DC-DC)___ ___* 5-function output pins for control forward/ backward/ turbo/___ ___right/ left.___ ___* Provide two transmissive interface (RF and IR) for different___ ___application.___ ___* Selectable Output Signal Format through MOD pin___ ___* Internal, Selectable DC-DC converter which need few___ ___external components___ ___* Provide two high effective amplifiers and enhancive signal___ ___enput (SI) recognition capacity for very weak signal for___ ___increasing remote control distance.___ ___* Few external components needed and Oscillator with___ ___an external resistor.___ ___* Low operating current.___ ___* Long distance Remote Control to 100M in UTC___ ___RCT2E and UTC RCR2C pairing.___ ___* Typical oscillator frequency:___ ___RF: 116~140KHz.___ ___IR: 114KHz(Carrier Frequency: 57KHz).___ ___IR: 76KHz(Carrier Frequency: 38KHz).___	___1.8 ~ 5.0___	___DIP-16___ ___SSOP-10___
___RCR2E___	___Remote Controller for Toy Car___	___Decoder for Remote Controller with Five Functions___ ___(Forward/Backward/Turbo/Right/Left)___ ______ ___* The UTC RCR2E works as decoder___ ___* RCR2E-A have not ZENER___ ___RCR2E-B built-in 3.6V ZENER___ ___* Five Pins for five control functions___ ___* Operating power-supply voltage:___ ___SOP-16: 2.0V ~ 5.0V, DIP-16: 2.5V ~ 5.0V___ ___* Auto-power-off if no press on any button in 8s or___ ___continuously press on any button over 4 minutes___ ___* Manual-power-off with OFF button___ ___* On-chip oscillator with an external resistor___ ___* On-chip reversing amplifiers___ ___* Low operating current___	___2.0 ~ 5.0___	___DIP-16___ ___SOP-16___
___RCR02___	___Remote Controller for Toy Car___	___Decoder For Remote Controller with Five Functions___ ______ ___*Five output pins for control functions___ ___*Operating power-supply voltage range: 2.5 to 5.0V___ ___*On-chip reversing amplifiers___ ___*On-chip oscillator with an external resistor___ ___*Low operating current___ ___*Few external components needed___	___2.5 ~ 5.0___	___DIP-16___ ___SOP-16___
___RCT02___	___Remote Controller for Toy Car___	___Encoder For Remote Controller with Five Functions___ ______ ___*Five input pins used for five control buttons___ ___*Operating power-supply voltage range: 2.5 ~ 5.0V___ ___*Auto-power-off if no press on any button in 4 minutes or___ ___continuously press on any button over 4 minutes___ ___*Manual-power-on/off with ON/OFF button___ ___*One output pin used for external power control___ ___*Press on any button as wake up___ ___*On-chip oscillator with an external resistor___ ___*Low operating current___ ___*Few external components needed___	___2.5 ~ 5.0___	___DIP-14___ ___SOP-14___
___RCR5___	___Remote Controller for Toy Car___	___Remote Controller with Nine Functions___ ______ ___* Operating voltage range: 2.4V~4.0V___ ___* Built-in 4.2V zener___ ___* Few external components needed___ ___* 9-function remote controller controlling Forward/ Backward/ Turbo/___ ___Right-turn/ Left turn/ four function keys___ ___* Complement to UTC RCT5.___	___2.4 ~ 4.0___	___DIP-22___
___UT912D___	___Decoder or Encoder IC___	___Decoders for Remote Controller___ ______ ___* Pair with UTC UT912E___ ___* Operating voltage: 2.4V ~ 12V___ ___* Low power and high noise immunity CMOS technology___ ___* Low standby current___ ___* Built-in oscillator needs only 5% resistor___ ___* Binary address setting___ ___* Received codes are checked 3 times___ ___* Capable of decoding 12 bits of information___ ___* Address/Data number combination: 8 address bits and 4 data___ ___bits___ ___* Vaild transmission indicator___ ___* Minimal external components___	___2.4 ~ 12.0___	___DIP-18___ ___SOP-20___
___UT912E___	___Decoder or Encoder IC___	___Encoders for Remote Controller___ ______ ___* Operating voltage: 2.4V ~ 12V___ ___* Low power and high noise immunity CMOS technology___ ___* Low standby current (0.1μA (typ.) at VDD=5V)___ ___* Minimum transmission word (Four words)___ ___* Built-in oscillator needs only 5% resistor___ ___* Data code has positive polarity___ ___* Minimal external components___	___2.4 ~ 12.0___	___DIP-14___ ___DIP-18___ ___SOP-16___ ___SOP-20___
___M3000___	___Decoder or Encoder IC___	___PIR Infrared Remote Control Circuit___ ______ ___* Low Power CMOS Technology___ ___* CMOS High Input Impedance Operational Amplifiers___ ___* Bi-Directional Level Detector / Excellent noise Immunity___ ___* Built-in Power up Disable & Output Pulse Control Logic___ ___* Dual Mode : Retriggerable & Non-Retriggerable___	___3.0 ~ 5.0___	___SOP-16___
___UT8803___	___Decoder or Encoder IC___	___PIR Infra-red Remote Control Circuit___ ______ ___* High Noise Immunity.___ ___* Output drivable RELAY or TRIAC.___ ___* Contain two OP amps, gain adjustable.___ ___* Control time adjustable.___ ___* Steady voltage inside output 3.1 V to drive the PIR directly.___ ___* Integrate zero cross detect, the AC power supply triggers___ ___synchronously, lowering the power supply pollution.___	___4.5 ~ 5.5___	___DIP-16___
___RBA5104___	___Remote Fan Control IC___	___Fan Remote Control Encoder___ ______ ___* Wide operation voltage: VCC=2.2~4.0V___ ___* Noise immunity technique___ ___* 2 bits custom code___ ___* 8 input channels maximum___ ___* Uses 455kHz crystal oscillator___ ___* Key-in oscillation, reduce static current dissipation.___ ___* 38kHz carrier transmits output.___ ___* LED indicates work state___	___2.0 ~ 4.0___	___DIP-16___
___RBA8206___	___Remote Fan Control IC___	___Remote Fan Control IC___ ______ ___* Low power consumption___ ___* Three speed modes: Strong, Middle and Low___ ___* Three operation modes: Ordinary, Nature and Rhythm Sleep___ ___* Work mode memory___ ___* Middle wind start-up___ ___* Buzzer indicator function operation___ ___* 2-bits consumer code___ ___* Uses 455kHz crystal oscillator___	___3.0 ~ 6.0___	___DIP-20___
___M30001___	___Decoder or Encoder IC___	___PIR INFRARED REMOTE CONTROL___ ___CIRCUIT___ ______ ___* Low stand-by current ＜50uA @ 3.0V___ ___* CMOS High Input Impedance Operational Amplifiers___ ___* Bi-Directional Level Detector / Excellent noise Immunity___ ___* Built-in Power up Disable & Output Pulse Control Logic___ ___* Dual Mode : Retriggerable & Non-Retriggerable___	___2.0 ~ 5.5___	___SOP-16___